What is a Plumbing Trap?

The Plumbing Trap is a simple device that bends pipe to allow waste material to flow. It prevents sewer gases from entering buildings by retaining fluid. In domestic applications, U, J or Q-shaped pipes are usually located below or within a plumbing fixture.

A P-shaped plumbing trap, on the other hand, is more popular. There are many types of plumbing traps on the market.

Plumbing work is a work that is directly related to water supply and disposal. It will not smell if the plumbing pipes framework is well planned and introduced in a manner that is acceptable. The following highlights are included in a plumbing trap.

It could be used as an essential trap in conjunction with the machine, as in certain European WC models. Or, it might be a different fitting, called a joined trap. This is associated with foul or waste water outlets of apparatuses.

The traps should be self-cleaning. Homegrown waste traps should be easy to clean. A good trap should keep a water seal in all streams.

The plumbing traps, which are located underneath or within a pipe apparatus, hold a small amount of water. The water holding water acts as a water seal to prevent foul gases from entering the channel pipes' structure.

All pipes installations (sinks, washbasins and baths), are equipped with traps. This article will discuss the main features of traps and various types of traps.

Also Read: Concrete Modulus of Rupture

Types of Traps in Plumbing

1. Gully Trap

These traps are designed to collect wastewater from washbasins, sinks, toilets and other areas of the building. They are connected to any nearby drains or sewers to ensure that no foul gases are released into the house. These traps are extremely sealable.

2. P trap

This trap can be used in conjunction with the Indian water closet (ORISSA pattern). Cast iron or UPV sheets are used to make the traps. The trap also has a water seal that prevents the passage of any foul gases into the house.

3. Q Trap

These types of plumbing traps are used in the latrine submerged storage area. It looks almost like an S trap, and it is used on the upper floor other than the ground.

4. S Trap

These plumbing traps are similar to a P trap and are used for fixing water closets in latrines. The only difference between the P traps and the S traps is that the P-shaped trap can be used to provide an outlet through a wall, while the S trap can be used to provide an outlet through a floor.

Also Read: Concrete Tensile Strenght

5. Floor Trap | Nahni Trap

Nahni Trap is another name for floor traps. Nahi Trap provides the water seal to prevent the ingress of foul gases into the building.

6. Bottle trap

To collect squander from kitchen sinks and washbasins, a bottle pumbling trap can be used.

7. Intercepting Trap

Intercepting plumbing traps are inserted into the Interceptor Manhole or Interceptor Chamber. The Interceptor sewer vent is installed to prevent the interception of public sewer and building sewer. This trap blocks the entry of foul gases from the public sewers by providing a water seal.

8. Grease Trap

To isolate the grease and keep it from contaminating the fluid, a grease trap is installed in the waste line at least once.

Also Read: Parapet

Created: 31/12/2022 07:48:11
Page views: 330